Sphinx SDP Standard ALPHA pistol, kal 9x19.
Pistolgrepp av Komposit.
Piplängd 115 mm. Magasinet rymmer 17 patroner.
Dubbelaction / Single action.
(SDP = Special Duty Pistol)
Sphinx SDP är värdig arvtagare till Sphinx 2000 och 3000 som numera är avslutade kapitel.
Sphinx SDP har fått alla positiva egenskaper och lite till från tidigare modeller. De eventuella negativa egenskaper som inte fanns på de tidigare modellerna finns inte heller på SDP modellen.
SDP är en högkvalitativ pistol med minimala toleranser, byggd av Schweiziska hantverkare.
Mantel och pipa är tillverkad av stål.
Stommen på SDP är tvådelad men permanent fixerad. Övre delen av stommen är tillverkad av aluminium medan undre delen (greppet) är tillverkat av antingen komposit, aluminium eller stål.
ALPHA = Komposit.
De två delarna är ihopskruvade permanent på fabriken och byte av greppdel är inte möjlig enligt konstruktörerna.
Just nu har vi tillgång till pistoler med komposit och aluminium greppdel.
The SPHINX SDP Standard Alpha is the largest and highest capacity pistol in the Alpha series and is designed with competition shooters in mind. The longer barrel and pistol grip provide accuracy and a higher magazine capacity over other SDP Alpha models. The competition inspired trigger is very smooth with a clean break and short, crisp, reset. The steel slide is machined from billet and is hand fitted to mate perfectly with the interior, full length guide rails, of the billet aluminum upper frame. The polymer pistol grip features interchangeable back-straps to adjust length and width of the grip, the grip inserts are specifically designed to maximize contact with the support hand for added control. Also for added control, the high trigger guard shape and beaver tail allow for high hand placement on the pistol frame to compliment the low bore axis of the barrel, which allow the shooters to easily manage recoil. A Picatinny rail on the frame allow for the addition of modern tactical shooting accessories. The front and rear cocking serrations offer different options of firearm manipulation and the dotted front sight contrasts with the black rear sight for quick target acquisition. Ambidextrous features include the decocking lever and a magazine release that can be switched to either side. The slide release lever also serves as the take-down pin and is located on the left side of the SDP Standard Alpha. Every component of the SDP Standard is manufactured to the highest standards and tolerances are extremely tight. The SDP Standard Alpha is very close in design to its predecessor, the legendary SPHINX 3000 race pistol, and is the only choice for discerning competition shooters with the will to win.
The new Sphinx® SDP STANDARD is a in Double-Action/Single-Action pistol with an ambidextrous decocking lever. An integrated recoil buffer improves the weapon’s accuracy. The full-length guide rails are not inserts like many other pistols, but machined in, providing additional strength and increasing accuracy levels. The integrated Picatinny rail is made from MIL-STD 1913 aluminum with 6-notches to hold a variety of accessories including lights and lasers.
The lower part of the frame or grip is made from aeronautic grade aluminium. The ergonomic, 3-component grip is made from soft and hard material for a comfortable, confident hold. Three interchangeable grip sizes (Small, Medium, and Large) are available.
TECHNICAL SPECIFICATION SDP STANDARD
Caliber 9x19 mm / 9x21 mm*
Overall Length 8.3 in / 210 mm
Overall Height 5.5 in / 140 mm
Overall Width 1.4 in / 35 mm
Weight 31.74 oz / 900 g
Barrel Length 4.5 in / 115 mm
Sight Radius 6.5 in / 165 mm
Sight Front: Negative angle iron blade with white dot
Sight Rear: Rear Iron (black) sight
Action: DA/SA with ambidextrous decocking lever
Trigger Pull Weight SA: 3.30 lb / 1.5 kg
DA: 10.14 lb / 4.6 kg
Slide material: Steel
Slide finish: Black with TIAIN coating
Frame material:
Upper Frame: Hard anodized aluminum
Lower Frame: Polymer, Aluminium or Steel.
Grip incl. finger molds
Interchangeable Inserts Polymer base with Rubber
Size S, M, L
Magazine catch left / right - reversible
Magazine capacity 17+1
The pistol can be delivered with 1 of 3 different lower material: Komposit, Aluminium or Steel.
Licenspliktigt vapen eller vapendel kan levereras först efter att licens beviljats av Polismyndigheten i ditt län.
Finn aktuella ansökningsblanketter hos Polisen:
http://polisen.se/Service/Blanketter/Vapen/
